Description
This line is characterised by high performance, high reliability and ease of maintenance:
- The range of widths of manufactured products is from 9.5 to 19 mm.
- Extrusion capacity up to 100 metres per minute.
- Accuracy of uniform product manufacturing 0.2 mm.
- Smoothness of operations, synchronisation and noise reduction provide additional adjustments to the parameters of the units and winding speed.
Orientation node
Four shafts with their own drive allow you to effectively control the speed of broaching and tension of the tape.
The rolling unit.
The shafts of the rolling unit are made of heavy-strength material, subject to vacuum hardening, which ensures their special strength and wear resistance. The depth of the rolling is pneumatically adjustable with high accuracy.
Semi-automatic melt filter.
The melt is adjustable by turning the hand rod.
Liquid removal unit.
Stabilisation and recralisation unit.
The tape is stabilised in 5 heat-insulated sections. This increases the warm-up and tensile time. Each section is protected from aluminum. Water cooler for increaseпроизводительности.
Additionally:
- Vacuum moisture separator; supling;
The device allows you to reduce the humidity of raw materials by up to 0.2% and increases the uniformity of the melt. Processed raw materials avoid all kinds of defects and defects of products. - Bunker drying;
- Autoloader;
- Cooler.
| Model: | JS-237AP2 | |||
| Characteristics. | ||||
| Raw Materials | PET | |||
| Number of lines | 1 | |||
| Ribbon width | 9,5/13/16/19 mm | |||
| Extruder productivity | 80-200 Kg/hour | |||
| Extruder | ||||
| Accuck | ||||
| 100 mm | ||||
| L/D | 27:1 | |||
| Driven motor | AC 75 hp + inverter | |||
| Heater power | 101 kW | |||
| Temperature control | 10 Zones | |||
| Hardening equipment | ||||
| Stainless steel container. steel. | + | |||
| Liquid removal unit | ||||
| Temperature control | + | |||
| Blower, Blower | 2 л.с. х 2 | |||
| Preheating unit | ||||
| Stainless steel shafts | 510 mm x 4 pcs. | |||
| Drive | 2 hp + inverter | |||
| Speed | 12 x 24 m/min | |||
| Temperature control | 4 zones | |||
| Stabilisation unit | ||||
| The swafts | 7 pcs. | |||
| Driven motor | 20 hp (inverter) | |||
| Speed range | 50-120 metres/min | |||
| Stabilisation unit 2 | ||||
| Heater | + | |||
| Heater power | ||||
| Temperature control | + | |||
| Blower, Blower | 1 hp x 1 | |||
| Shaft diameter | Ø 213 mm | |||
| Number of shafts | 7 pcs. | |||
| Speed | 15-20 m/min | |||
| Rolling unit. | Pneumatically controlled | |||
| Motor | High-level 2.25 kW | |||
| Thermal control centre: | ||||
| Heater | + | |||
| Temperature control | 1 | |||
| Stainless steel container. steel. | + | |||
| Blower, Blower | 2 hp x 1 | |||
| Receiving nodes | ||||
| Motor | High-level 2.25 kW x 2 | |||
| Shaft diameter | Ø 213 mm x 2 | |||
| Winding: | ||||
| Spindles | 4 pcs. | |||
| Motor | High momentary 0.75 kW | |||
| Winding width | 152 mm, 200 mm | |||
| Bobbins | 200 mm, 400 mm | |||
*ABOVEMENTIONED EQUIPMENT SPECIFICATIONS ARE SUBJECT TO MODIFICATIONS WITHOUT NOTICE DEPENDING ON THE APPLICATION.
Reviews
There are no reviews yet.